Model: Antminer Z15

Brand: Bitmain

Minable coins: BTC/BCH

Encryption Algorithm: SHA256

Hashrate: 420TH/s

Power supply: 1510W

Bitmain Antminer Z15 420th Equihash Zec Coin Miner Zcash Mining Asic 1510w
Bitmain Antminer Z15 420th Equihash Zec Coin Miner Zcash Mining Asic 1510w
Bitmain Antminer Z15 420th Equihash Zec Coin Miner Zcash Mining Asic 1510w
Bitmain Antminer Z15 420th Equihash Zec Coin Miner Zcash Mining Asic 1510w

Description

The Antminer Z15 is the newest ASIC model by Bitmain for Equihash mining. (Antminer Z15 is 3x more powerful and efficient than the Bitmain Antminer Z11) All crypto coins based on the Equihash algorithm are supported including Zcash. It hits a hashrate of 420k Sol/s with a power consumption of 1510w for Equihash mining which is about three times, the hashrate of the older Antminer Z11 ASIC and with just a bit higher power usage.

Bitmain Z15 was released in June 2020, and it is one of the best miners of Zcash. It is well equipped and has excellent features, such as low power consumption of 1510W and superior processing power. Therefore it is expected to fetch a sizable income for the owner. It comes with an APW7 power cable.

 

Antminner Z15 04
Antminner Z15 03
Antminner Z15 02

Product Parameters

Model Antminer Z15
Brand  Bitmain
Minable coins BTC/BCH
Encryption Algorithm SHA256
Hashrate 420TH/s
Power supply  1510W
Fan(s) 2
Network connecting Type RJ45 Ethernet 10/100M
Equipment size(L*W*H) 245mm*133mm*290mm
Noise Level 72db
Net weight 4.2kg
Temperature 5-45 °c

 

Tips for Maintenance of Miner

ESD Protection

The flat cable and fan interface on control board are directly connected to IC pins. If these interfaces are touched without releasing the carried ESD, the IC pins are easily damaged to cause failure of the miner which can only be returned to the manufacturer for repairment.

Power Off before Maintenance

Power off the miner before miner installation or maintenance, otherwise the hashboard or control board will be damaged and can only be returned to the manufacturer for repairment.

Power-on Sequence

Power on hashboard first, then control board. If one power supply for one miner, power on directly after the hashboard and control board have been connected.

Direction of 6PIN Interface

Pay attention to the direction of 6PIN cable before connection, otherwise the power protection may be triggered, control board or hashboard may be damaged.

Power Supply

It's recommended to connect one power supply to one miner.

One miner can be connected to one or multiple power supplies, but multiple miners shall not be connected to multiple power supplies.

One hashboard can only be driven by one power supply. It's prohibited to provide multiple power supplies for one hashboard.

  • Contact us to get more information

    Leave your message and we will contact you within 24 hours